Revitalizing preowned furnishings is a well-loved passion in my home. There’s a reupholstered couch within the sunroom, bentwood chairs with new velvet seat covers within the eating room, and a mid-century dresser within the bed room that acquired a number of coats of paint on the chipped veneer shell.
Earlier this spring, the wooden veneer floor of our Craigslist-find espresso desk was displaying some put on. It didn’t hassle me an excessive amount of, however my husband Austin needed to try to coat the highest in concrete to offer it a distinct look. We sanded it down after which utilized the concrete. It was not an important success. The subsequent morning the perimeters had already damaged away from the concrete prime and it didn’t look like a long-lasting resolution. We eliminated the concrete layer to search out that the wooden veneer had soaked within the moisture from the concrete and was now trying worse than ever. I’m positive we might have accomplished extra analysis and tried to make the concrete work, however it was such a disappointment that we simply began on the lookout for new espresso tables.
Fortunately, there have been about 20 items of 2-by-3-foot sierra white granite that had been simply the appropriate dimension and $40 apiece. The one drawback was that every one of them had been drilled with 2-inch holes for plumbing fixtures. Austin got here up with an answer and we went for it. This DIY mission was rather more doable for us than the concrete prime and we accomplished it in lower than an hour. I hope this mission conjures up you to reimagine items in your individual dwelling! —Lauren
- Espresso desk with pedestal base or braced legs
- Stone countertop lower barely bigger than espresso desk leg span
- eight clear non-slip furnishings bumpers
- Hardwood scrap related depth to stone (if relevant)
- Hack noticed
- Medium grit sandpaper
- Drill and drill bit (if relevant)
- Gap noticed drill attachment 1/4-inch bigger than gap in stone (if relevant)
- Hammer or small rubber mallet
Step 1Lay the desk on its prime. Use a hack noticed to separate the legs from the highest on the seam.
Step 2Place the set of legs right-side up and gently sand the leg base the place the highest was eliminated.
Step 3Place two non-slip furnishings bumpers on every leg the place the highest will sit.
Place the leg body the place the espresso desk will go. Whereas the furnishings bumpers and the load of the stone prime will make sure the desk will probably be sturdy for on a regular basis use, will probably be too heavy to regulate and transfer round simply being two items.
Step 4In case your stone piece has a precut gap that must be plugged, use a drill with a gap noticed attachment that’s about 1/4-inch bigger than the outlet to chop a disk from a hardwood scrap (we used walnut). Use sandpaper to scrub up the perimeters and to buff down the perimeters till the disk suits into the outlet with a little bit of stress. Place the disk within the gap, place a towel excessive and frivolously hammer it till it’s set in place. Our unique concept was to hammer it till it was flush with the desk floor, however we ended up liking the look of it sticking up from the floor.
Step 5Place the stone floor onto the legs with one other particular person and readjust till it’s centered — and also you’re accomplished!