There’s no denying the color of falling autumn leaves is spectacular to behold… however it should be extremely arduous to breed whenever you’re crafting, proper? Unsuitable! Angela Finch is right here with a stunning residence decor venture… and a intelligent clay craft hack that can allow you to supply daring and delightful autumnal clay leaf decorations with ease… no portray abilities required! Take a look at her step-by-step tutorial under, and convey the fantastic thing about autumn indoors.
Rework polymer clay into a good looking Maple leaf tea gentle holder! Be taught the Skinner mix method to create a good looking color palette with ease.
Time it Takes to Make: 2 – 2 and a half hours
Ability Stage: Intermediate
You Will Want:
- Polymer clay in Three colors
- Copper Wax
- Nice sand paper
- Satin Varnish
- Clay Instruments
- Maple Leaf
- Glass Bowl
Step-by-Step Autumnal Clay Leaf Venture:
I used half a block of Cadmium Purple Hue, 1 / 4 of a block of Uncooked Senna, and eventually 1 / 4 of a block of Orange polymer clay, lower utilizing the blades. To start, you’ll first must situation the clay. To do that, roll the polymer clay right into a snake.
Subsequent, twist the snake, as proven above. If the clay cracks, repeat the roll and twist. Relying on the age of the clay, this may take fairly a couple of goes. (Word: the tile is used because the work floor!)
Subsequent, roll out sheets of clay with the conditioned clay. Lower the clay into proper angle triangles with a blade, and match collectively as proven. These would be the colors that can mix into one another. Word that the stronger colors like brown don’t want as a lot clay to make an affect.
Bend the clay mosaic in half. Rigorously put it in a clay curler with the bend on the backside. This implies all of the air might be taken out of the clay. As soon as rolled, fold the clay in half once more from the underside to the highest, and repeat till you might be proud of the mix. This will take fairly a couple of rolls.
Scale back the clay curler to a thinner setting, and put the flat piece of clay by means of it.
Place the leaf onto the clay. If the polymer clay isn’t sufficiently big, put it by means of the curler on a better quantity. (I like to recommend the very best to go as much as is 4) Subsequent, use an acrylic curler to roll the leaf into place. This additionally helps the leaf sample switch to the polymer clay.
Lower across the leaf; watch out, the leaf could transfer and need to be re-rolled. The slicing can take a while relying on the complexity of the design. Rigorously take away the clay when you are slicing.
This may be re-used for different initiatives if saved in a sealed clear plastic bag.
Rigorously take away the polymer clay leaf from the work floor. This may be tough because the polymer clay might be barely sticking to the tile. Use a tissue blade beneath the leaf to raise it. Rigorously organize the leaf face down on a glass bowl. It will present the form of the leaf. Put the glass bowl on an oven tray lined with tin foil. Observe the directions in your clay for heating directions. I baked it for an hour.
After baking, anticipate the polymer clay to chill. Then fastidiously prise it off the bowl. There could also be some sharp corners on the leaf, use a tremendous sandpaper to softly eliminate them. At this level it’s possible you’ll want to use a wax gleam or an acrylic paint to focus on the veins of the leaves. Lastly, paint either side of the leaf with Satin Varnish. Watch for it to dry, and there you’ve it: a good looking tea gentle holder!
You may show your attractive autumnal clay leaf by itself as an eye catching desk ornament, or add a tealight to create a comfortable ambiance on a cool autumn night.